FOUNDATION Fieldbus USB interface
| article number | 16300-0101 |
| Interface | USB 2.0 |
| Transmission rate USB | 480 MBit/s (High-Speed), 12 MBit/s (Full-Speed) |
| FF-interface | H1, Linkmaster |
| Transmission rate FF | 31,25 kBit/s |
| Transmitter supply voltage | 22 ... 24 V, max. 15 mA |
| Controller | Motorola Coldfire |
| Flash | 256 kB |
| RAM | 256 kB |
| Temperature range | 0 °C … 60 °C |
| RoHs2-conform | yes |
| Driver software | Windows XP, Windows 7, 8, 10 |
| Dimensions | 105 x 54 x 30 mm (basic device), 36 x 35 x 16 mm (bus connector) |
| Delivery content | Hardware, Driver, Configuration- and Testsoftware; Documentation German and English on CD |
| Available software | FDT 1.2 (isFF CommDTM) |
Contact
Request an offer
Support request
Downloads
Note: There is a file embedded within this post, please visit this post to download the file. Note: There is a file embedded within this post, please visit this post to download the file.The isFF USB Interface is a FOUNDATION Fieldbus USB interface, that is made for rapid commissioning of FOUNDATION Fieldbus devices. Due to power supply from USB and plug-and-play functionality, it is ready for use within few minutes. Each FDT-capable application can be used as a software tool provided by a FDT 1.2-compliant communication-DTM.
The isFF USB enables optional power supply of one FOUNDATION Fieldbus Field device by an integrated current feed source. Therefore it is especially suitable as a tool for bench top commissioning; expensive wiring and additional power supply can be avoided. Of course, it is also possible to connect the isFF USB to an existing network segment.
Der Beitrag isFF USB erschien zuerst auf Thorsis Technologies.